MIL-DTL-5099C
AEROSPACE INDUSTRIES ASSOCIATION
NASM33737
- Nut, Sheet Spring, Instrument Mounting
(Copies of this document are available online at www.aia-aerospace.org/ or from the Aerospace
Industries Association, 1000 Wilson Boulevard, Suite 1700, Arlington, VA 22209-3928.)
ASTM INTERNATIONAL
ASTM C1036
- Standard Specification for Flat Glass
(Copies of this document are available online at https://www.astm.org/ or from ASTM
International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959.)
SAE INTERNATIONAL
SAE AMS-QQ-P-416
- Plating, Cadmium (Electrodeposited)
SAE AS5202
- Port or Fitting End, Internal Straight Thread,
Design Standard
(Copies of these documents are available online at https://www.sae.org or from SAE
International, 400 Commonwealth Drive, Warrendale, PA 15096-0001.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event
of a conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified, the contractor shall furnish sample units for first article
inspection and approval (see 4.2.1 and 6.2).
3.2 Materials. Materials shall conform to applicable specifications and shall be as
specified herein. Materials for which there are no applicable specifications, or which are not
specifically described herein, shall be of the best quality and of the lightest practicable weight
suitable for the purpose intended.
3.2.1 Critical materials. Non-critical materials shall be used where practicable. Where
the use of a critical material is essential to meet specification requirements, the material used
shall be the least critical of those that are adequate for the purpose.
3.2.2 Nonmagnetic materials. Nonmagnetic materials shall be used for all parts of the
indicator except where magnetic materials are essential.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business