INCH-POUND
MIL-DTL-5099C
30 March 2011
SUPERSEDING
MIL-I-5099B
13 December 1968
DETAIL SPECIFICATION
INDICATOR, CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1
Inactive for new design after 24 March 1999.
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the design and performance requirements for one
type of pressure altitude indicator having a range of 0 to 50,000 feet.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to Defense
Logistics Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616,
or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may want to
verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil/.
AMSC N/A
FSC 6685
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business