MIL-DTL-5099C
TABLE II. Conformance inspection and test requirements - Continued.
Sampling
Sampling
Reference
Individual
plan A
plan B
(See 4.3.2.1)
(See 4.3.2.2)
Inspections and tests
paragraph
(See 4.3.1)
After effect
4.5.4.1
X
X
X
Position error
4.5.5
X
X
X
Friction
4.5.6
X
X
X
Scale error (-55 °C (-67 °F))
4.5.7
-
X
X
High temp. characteristics
4.5.8
-
X
X
Vibration error
4.5.9
-
X
X
Overpressure
4.5.10
-
X
X
Magnetic effect
4.5.11
-
X
X
Vibration endurance
4.5.12
-
-
X
High altitude (low temp.)
4.5.13
-
-
X
Humidity
4.5.14
-
-
X
Fungus resistance
4.5.15
-
-
X
Salt fog
4.5.16
-
-
X
Mounting lugs
4.5.17
-
-
X
Internal examination
4.5.18
-
-
X
4.3.1 Individual inspection. Each indicator submitted for acceptance shall be subjected
to individual inspections and tests. These inspections and tests shall determine compliance with
the requirements of material, workmanship, and operational accuracy. As a minimum, each
indicator accepted shall have passed the individual inspections and tests shown in table II.
4.3.2 Sampling plans. The sampling plans shall consist of sampling plan A and
sampling plan B inspections and tests shown in table II. The inspection samples selected for
sampling tests shall first have passed the individual inspections. The inspection samples that
have been subjected to sampling plan A inspection shall not be delivered on contract until they
have been refurbished to good as new condition, resubmitted, and passed all the individual
inspections. Inspection samples that have been subjected to the sampling plan B inspection shall
not be delivered on the contract.
4.3.2.1 Sampling plan A sample selection. Sampling plan A samples shall be selected at
random in accordance with the schedule shown in table III. When a defective indicator occurs,
no items from those still on-hand or later produced shall be accepted until the extent and cause of
the failure have been determined and appropriately corrected. In addition, when a failure occurs,
shift to one sample out of fifteen (when sampling plan B is omitted) and proceed as indicated.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business