INCH-POUND
MIL-DTL-25308C
1 November 2010
Superseding
MIL-G-25308B
2 December 1971
DETAIL SPECIFICATION
GAGE, PRESSURE, DIAL INDICATING, HYDRAULIC, TYPE ME-1
Inactive for new design after 9 March 1999.
1. SCOPE
1.1 Scope. This specification covers the requirements for one type of hydraulic, dial indicating,
pressure gage, designated type ME-1.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements of documents cited in sections 3, 4, or 5 of this specification, whether or
not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks of the exact revision listed below form a part of this document to the extent specified
herein.
Comments, suggestions, or questions on this document should be addressed to Defense Logistic
Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5610 or emailed
to STDZNMGT@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6685
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business