MIL-PRF-62430B
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-454
-
General Guidelines for Electronic Equipment
MIL-HDBK-759
-
Human Engineering Design Guidelines
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other
Government documents, drawings, and publications form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract (see 6.2).
U.S. ARMY TACOM DRAWINGS
12284516
-
Rear Engine, Sub-Assembly
12302361
-
Harness Assembly, Thermocouple
12302362
-
Harness Assembly, Thermocouple
12302363
-
Harness Assembly, Thermocouple
12302438
-
Harness Assembly, Electrical, Molded
12472667
-
Harness Assembly, Electrical, Molded
(Copies of these documents are available from DAMI_STANDARDIZATION@conus.army.mil
or U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,
ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000.)
2.3 Non-Government publications. The following documents form a part of this
document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI/ASQ Zl.4
-
Sampling Procedures and Tables for Inspection by
Attributes (DoD Adopted)
ANSI/SAE AS478
-
Identification Marking Methods. (DoD Adopted)
(Copies of these documents are available from ANSI Customer Service Department, 25 W. 43rd
Street, 4th Floor, New York, NY 10036 (or website: https://www.ansi.org/) or American Society
for Quality, 600 North Plankinton Avenue, Milwaukee, WI 53203 (or website:
https://www.asq.org/) or Society of Automotive Engineers (SAE) 400 Commonwealth Drive,
Warrendale, PA 15096-0001 (or website https://www.sae.org/).)
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business