INCH-POUND
MIL-PRF-62430B
14 April 2010
SUPERSEDING
MIL-PRF-62430A(AT)
26 July 1996
PERFORMANCE SPECIFICATION
HARNESS ASSEMBLY, THERMOCOUPLE
This specification is approved for use by all Departments and Agencies of
the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers four types of thermocouple harness assemblies,
hereinafter referred to as the harness.
1.2 Classification. Harnesses are of the following types (see 6.2):
Type I
-
Differentiating characteristics in accordance with Drawing 12302361
and as specified herein.
Type II -
Differentiating characteristics in accordance with Drawing 12302362
and as specified herein.
Type III -
Differentiating characteristics in accordance with Drawing 12302363
and as specified herein.
Type IV -
Differentiating characteristics in accordance with Drawing 12302438
or Drawing 12472667 and as specified herein.
1.3 Part or identifying number (PIN).
Comments, suggestions, or questions on this document should be addressed to
U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,
ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000
or emailed to DAMI_STANDARDIZATION@conus.army.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 6685
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business