MIL-DTL-6508C
AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
ASME Y14.100
- Engineering Drawing Properties
(Copies of this document are available online at https://www.asme.org/ or from ASME, Three
Park Avenue, New York, NY 10016-5990.)
ASTM INTERNATIONAL
ASTM E171
- Standard Specification for Standard Atmospheres
for Conditioning and Testing Flexible Barrier
Materials
(Copies of this document are available online at https://www.astm.org/ or from ASTM
International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event
of a conflict between the text of this document and the references cited herein (except for related
specification sheet), the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 Specification sheet. The individual item requirements shall be as specified herein
and in accordance with the applicable specification sheet. In the event of any conflict between
the requirements of this specification and the specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.3 Commercial parts. Commercial parts having suitable properties may be used where,
on the date of invitation for bids, there are no suitable standard parts available. In any case,
commercial utility parts, such as screws, bolts, nuts, and cotter pins, having suitable properties,
may be used provided:
a. They can be replaced by the standard parts (MS or AN) without alteration.
b. The corresponding standard part numbers are referenced in the parts list and, if
practicable, on the contractor's drawings.
3.4 Standard parts. With the exception of 3.3, MS and AN standard parts shall be used
where they suit the purpose. They shall be identified on the drawings by their part numbers.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business