MIL-DTL-6508C
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful,
but is not mandatory.)
6.1 Intended use. The thermometers covered by this specification are intended for use in
aircraft for the measurement of free air temperature.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a.
Title, number, and date of this specification.
b.
MS part number (see 1.2).
c.
Quantity desired.
d.
First article, if required (see 3.1).
e.
Packaging requirements (see 5.1).
6.3 Provisions for first article tests. Manufacture of any further thermometer on the
particular contract will be suspended until the samples submitted are pronounced satisfactory by
the procuring activity. When a contractor is in continuous production of these thermometers
from contract to contract, submission of further first article samples on the subsequent contracts
may be waived at the discretion of the procuring activity. Approval of first article samples or the
waiving of first article tests does not preclude the requirements of acceptance testing. It will be
understood that the product supplied under contract or order will be identical to the
corresponding first article sample in design, construction, quality, material, workmanship, and
method of manufacture. Deviation from the standards of the first article sample will be made
only by the procuring activity. Evidence of unauthorized change will constitute cause for
rejection.
6.4 Subject term (key word) listing.
Altitude
Atmosphere
Drift
Durability
Position error
Response time
Scale error
Sealing
Temperature
Thermal conductivity
Vibration endurance
6.5 Changes from previous issue. Marginal notations are not used in this revision to
identify changes with respect to the previous issue due to the extent of the changes.
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business