INCH-POUND
MIL-DTL-27190C
19 December 2006
SUPERSEDING
MIL-I-27190B
31 October 1967
DETAIL SPECIFICATION
INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI
Inactive for new design after 24 March 1999.
This specification is approved for use by all departments and agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of hermetically sealed, remote-indicating,
synchro-type, integrally lighted, 0-4,000 pounds per square inch (psi) hydraulic pressure
indicator, designated AGU-3/A.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
Comments, suggestions, or questions on this document should be addressed to Defense Supply
Center Richmond, ATTN: DSCR-VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-
5616 or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6685
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business