MS28034B
1.00 ± 0.005
DRILL 0.070 ± 0.016, 2 HOLES FOR SAFETY WIRING, ALTERNATE LOCATION ACROSS
OPPOSITE CORNERS IS ACCEPTABLE
0.062 ± 0.016
SEE NOTE 1
0.625 ± 0.005
0.188 ± 0.005
SEE NOTE 3
100
0.390 ± 0.016
SEE NOTE 2
L ± 0.031
TIP CONFIGURATION IS OPTIONAL
0.281 DIA MAX
|
PIN |
Stem length "L" (inches) |
Overall length (nominal) (inches) |
MS28034-4 |
1.875 |
2.506 |
Dimensions in inches.
This bulb to be furnished with gasket SAE AS35769-15. All exposed joints shall be hermetically sealed.
Notes:
1. Electrical receptacle shall be in accordance with MS33678-12S-3P, except as noted.
2. The fitting area shall be in accordance with SAE AS4395-E-08, except as noted. Specifically, there is no nipple extension past the end of the thread and the sealing area has a 100 µin maximum finish.
3. Stamp or engrave MS part number, manufacturer's part number, name of manufacturer, and serial number in accordance with MIL-STD-130.
FIGURE 3. Dimensions and tolerances, MS28034-4.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business