MS28034B
DRILL 0.070 ± 0.016 2 HOLES FOR SAFETY |
|||
W IRING, ALTERNATE |
0.062 |
||
LOCATION ACROSS |
|||
OPPOSITE CORNERS |
|||
IS ACCEPTABLE |
|||
0.875
SEE NOTE 3
SEE NOTE 1
0.750 MAX
0.125
0.500
SEE
NOTE 2
45°
0.875 ± 0.031
L (REF) TIP CONFIGURATION IS OPTIONAL
0.250 ± 0.015
|
PIN |
Stem length "L" (reference) (inches) |
Overall length (nominal) (inches) |
MS28034-3 |
0.325 |
2.125 |
The centerline through the alignment key in the receptacle shall be perpendicular to the centerline through the pins. The position of the pins relative to the flats on the hexagonal is optional.
Dimensions in inches.
Unless otherwise specified, tolerances: decimals ±0.016, angles ±1/2 degree. All exposed joints shall be hermetically sealed.
This bulb to be furnished with gasket SAE AS35769-8.
Notes:
1. Electrical receptacle shall be in accordance with MS33678-12S-3P, except as noted.
2. The fitting area shall be in accordance with SAE AS4395-E-04, except as noted.
3. Stamp or engrave MS part number, manufacturer's part number, name of manufacturer, and serial number in accordance with MIL-STD-130.
FIGURE 2. Dimensions and tolerances, MS28034-3.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business