MS28034B
0.063
0.875
SEE NOTE 2
SEE NOTE 1
0.750 MAX 0.125
0.500
SEE DETAIL A
0.625 DIA
SHOULDER ALLOWED
0.000-0.016
+0.031
-0.000
0.281
L ± 0.031
THREAD 0.625-18UNF-3
0.047 X 45°
0.551
+0.010
-0.000
DETAIL A
0.031
0.281 MAX DIA
TIP CONFIGURATION IS OPTIONAL
PIN |
Stem length "L" (inches) |
Overall length (nominal) (inches) |
MS28034-1 |
1.875 |
3.500 |
MS28034-2 |
4.000 |
5.625 |
The centerline through the alignment key in the receptacle shall be perpendicular to the centerline through the pins. The position of the pins relative to the flats on the hexagonal is optional.
Dimensions in inches.
Unless otherwise specified, tolerances: decimal ±0.016, angles ±2 degrees. All exposed joints shall be hermetically sealed.
This bulb to be furnished with gasket SAE AS35769-11.
Notes:
1. Electrical receptacle shall be in accordance with MS33678-12S-3P, except as noted.
2. Stamp or engrave MS part number, manufacturer's part number, name of manufacturer, and serial number in accordance with MIL-STD-130.
FIGURE 1. Dimensions and tolerances, MS28034-1 and MS28034-2.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business