INCH-POUND
MS24478C
9 November 2006
SUPERSEDING MS24478B
29 January 1969
DETAIL SPECIFICATION SHEET
GAGE, SINGLE 1 INCH DIAL, PNEUMATIC PRESSURE
Reactivated after 9 November 06 and may be used for new and existing designs and acquisitions.
This specification sheet is approved for use by all departments and agencies of the Department of
Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet, MIL-DTL-25867, "Gage, Pressure, Dial Indicating, Pneumatic", and figure 1.
1.297 DIA. (REF)
1.219 DIA.
1.0 DIA. MIN. RING OPENING
0.766
0.109 (REF)
0.750
CONNECTION END IN ACCORDANCE WITH AND10050
7/16-20 UNF-3B TH'DS
0.688 ± 0.005 SQ. WRENCH FLATS
NAMEPLATE
0.375
MIN. LENGTH OF WRENCH FLATS
VENT
0.781 ± 0.010
LOCATION
LOCATION OPTIONAL
NOTE: Dimensions in inches. Unless otherwise specified, tolerances in decimals ±0.016.
FIGURE 1. Dimensions and tolerances.
AMSC N/A FSC 6685
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business