INCH-POUND
MIL-DTL-25026C
16 May 2011
SUPERSEDING
MIL-I-25026B
15 February 1985
DETAIL SPECIFICATION
INDICATOR, TEMPERATURE, THERMOCOUPLE,
ENGINE EXHAUST, TYPE MJ-4
Inactive for new design after 24 March 1999.
This specification is approved for use by all departments and agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for one type of single pointer,
engine exhaust thermocouple temperature indicator designated Type MJ-4.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
2.2 Government documents.
2.2.1 Specifications and standards. The following specifications and standards form a
part of this document to the extent specified herein. Unless otherwise specified, the issues of
these documents are those cited in the solicitation or contract (see 6.2).
Comments, suggestions, or questions on this document should be addressed to Defense Logistics
Agency - Aviation, ATTN: DLA Aviation-VEB, 8000 Jefferson Davis Highway, Richmond, VA
23297-5616 or e-mailed to STDZNMGT@dla.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST database at
AMSC N/A
FSC 6685
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business