INCH-POUND
MIL-DTL-6019E
4 February 2011
SUPERSEDING
MIL-DTL-6019D
6 March 2002
DETAIL SPECIFICATION
GAGES, PRESSURE, DIAL INDICATING, LOW-PRESSURE OXYGEN
Inactive for new design after 9 March 1999.
This specification is approved for use by all departments and agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers low-pressure oxygen system pressure gages for
aircraft use.
1.2 Classification. Low-pressure oxygen system pressure gages should be of the
following types, as specified (see 6.2):
Type I - regulator mounting low-pressure oxygen
Type II - panel mounting low-pressure oxygen
1.3 Part or identifying number (PIN). The following PINs are specified as continuation
of PINs from previous AN sheets.
Type I - AN6026-1B
Type II - AN6021-1B
Comments, suggestions, or questions on this document should be addressed to Defense Logistic
Agency Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5610 or emailed
to STDZNMGT@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC 6685
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business